GC Pattern Resin Ls 1-1 Package

Description

Features:

1. Low polymerization shrinkage
2. Greater accuracy and dimensional stability
3. Improved defined margins
4. High strength; ultra smooth surface
5. No distortion
6. Strength is not compromised, even in thin layers
7. Excellent fluidity
8. Easy manipulation and handling due to thixotrophy
9. Allows for direct and indirect pattern making technique
10. High wettability of powder and liquid very easily without mixing
11. Ash-free
12. Leaves no ash or residue after burn out
13. Results in smoother cast surfaces

Direction to use:

1. Powder and liquid preparation:
Dispense adequate amounts of powder and liquid into each rubber cup.
2. Building the coping (for secondary crown patterns):
Moisten the tip of the brush with liquid and pick up a small amount of powder. Deposit this mixture on the crown and build up the secondary crown pattern by repeating the procedure.
3. Checking the internal surface:
After the resin has set, remove the pattern carefully and check the margin and internal surface.
4. Fine adjustment:
Return the pattern to the internal crown and make a uniform thickness of 0.3-0.4 mm using a bur.
5. Waxing veneer and cut out:
Perform the wax-up with inlay wax, cut out the veneer, and place the retention beads.
6. Investing, burning out, and casting:
Hold at 250°C (482°F) for 1 hour before raising to the final burn-out temperature.

Key specifications:

• WARNINGS:
The liquid is highly flammable. Avoid sources of ignition.
• PRECAUTIONS:
Do not mix with other chemically cured resins. Do not return residual powder and liquid to the bottle.

Packaging:

• 1 x 100g Powder
• 1 x 105mL Liquid
• Mixing cups
• Brush