Description
Features
• Bulk Fill is possible due to Ivocerin, the patented light initiator
• Special filler technology ensures low shrinkage stress
• Esthetic results are achieved quickly and efficiently in the posterior region
Direction to Use
STEP1. Select the shade
STEP2. Prepare the cavity according to the requirements of the adhesive technique. Clean the cavity with water spray. Air dry the cavity.
STEP3. Apply a pulp protector (calcium hydroxide material, e. g. ApexCal®) if needed; only cover areas close to the pulp and subsequently apply a pressure resistant cement (e.g. Vivaglass® Liner).
STEP4. Place a matrix and an interdental wedge, if required.
STEP5-Apply N-Etch on enamel and subsequently on dentin; and allow a reaction time of 15 seconds. Afterwards, thoroughly rinse off the etchant with water spray and dry the tooth surfaces with oil-free air. Avoid excessive drying of the dentin. The etched enamel surface should have a chalky white appearance. If this is not the case, repeat the etching procedure using a shorter reaction time.
STEP6. Apply a thick layer of Tetric N-Bond on the enamel and dentin surfaces, using the enclosed application brush. Light-cure Tetric N-Bond according to the curing time recommendations.
Key Specifications
Composition:
Tetric N-Bond contains phosphoric acid acrylate, HEMA, Bis-GMA, urethane dimethacrylate, ethanol, film-forming agent, initiators and stabilizers.
Curing light:
Material High Power program Low Power program
bluephase N 10s 10s
bluephase NMC 10s 10s
Packaging
Tetric n ceram composit 10 srg(Neno composit):
• A1/1
• A2/2
• A3/1
• B2/1
• Special shade( B2D/ BLEACH L / TRANSLUCENT)
• B2D/1
• Bleach L/1
• Translucent/1
• Tetric flow:
• A2/1
• A3/1
• Tn bond 6gm
